Cameras & IR illumination
Placement and geometry for the working volume.
TAU LUMEN / OPTICAL MOCAP
Optical motion
capture system.
Cameras see retroreflective markers on people and objects. Software determines their 3D position — from site layout to usable output data.
1440 × 1080Mono8
up to 249.1camera fps
PoEpower & data
SYSTEM COMPONENTS
Everything a working scene needs.
The exact kit depends on the working volume, objects and required result.
Markers & suits
Passive retroreflective markers and mounts.
Network & synchronisation
PoE, processing nodes and cable routes.
Lumen Studio
Software within the scope of the supplied release.
MOCAP / ANIMATION & VIRTUAL PRODUCTION
Capture movement instead of fighting infrastructure
The system is calculated for the area, number of performers, occlusion and task. One project covers cameras, network, markers, software, calibration and operator training.
Value: a predictable preparation, recording and data-validation workflow rather than a standalone set of cameras.EDUCATIONAL MOCAP STUDIO
A lesson, not a collection of hardware.
Target workflow: the instructor prepares a lesson, checks readiness, records movement and receives data for further work.
- 01
Site
Dimensions, mounts, reflective surfaces and network.
- 02
Readiness
Which nodes are ready and why recording was stopped.
- 03
Take
Where the recording is stored and whether data is missing.
- 04
Repeatability
How to reopen a session and which version was used.
BENCH TEST / 29 OCT 2026
Numbers with measurement conditions.
| Test | Result | Applicability limit |
|---|---|---|
| Comparison with OptiTrack | 0.2 mm | Test result; not RMSE or guaranteed accuracy |
| Marker detection | 11 m | Specific bench; not maximum range |
| Exposure synchronisation | Approx. 5 μs | Oscilloscope measurement; not jitter |
| Frame transit | Approx. 4 ms | Named stage; not full application latency |
16 CAMERAS / TURNKEY
$74,481
End-customer reference: cameras, infrastructure, software, installation, training and 12 months of support.
Converted at the CBR reference rate on 31 Oct 2026: USD 1 = RUB 80.5573.PARTNER TERMSIn a personal proposal
Pricing and terms depend on the project scope and are agreed separately.
Configure and download estimateFAQ
Optical MOCAP FAQ
Is 249.1 fps the rate of ready 3D poses?+
No. It is a camera-node parameter at full resolution. The rate of finished 3D data depends on processing, configuration and system mode.
How many cameras does my site need?+
Room size alone is not enough. The estimate considers area, movement, number of people and objects, occlusion and purpose. The configurator gives a preliminary recommendation; an engineer confirms the final geometry.
How does Lumen compare with VICON, OptiTrack, NOKOV and Antilatency?+
Lumen is an optical marker system with a complete-cycle estimate: hardware, software, deployment, training and support. Compare not only cameras, but data fitness, workflow and the cost of an accepted result for your scene.
Does Lumen already work with TAU gloves?+
Integration is under development. Supported versions and the joint workflow will be published after validation.